As a matter of fact, tall structures without indicators that they exist may pose a major threat to the life of passengers in an aircraft. Many people have perished as a result of airplanes and choppers hitting tall surfaces like mountains and hills. That is why any structure or building whose height is two hundred feet or above high is required to have a signal that indicates the height so that the pilot in any low flying aircraft can see it. Proper illumination can be achieved through installation of high intensity tower lighting systems.
A tower is basically a structure that is tall and whose thickness is far much un-proportional to the height. People tend to confuse these structures with masts. However, masts have guy-wires that are used to support them. These structures are also distinguished from buildings because they are not built with habitable characteristics, they are not built for a living but for other functions. They may be made to indicate time using clocks.
On the other hand, masts may contain aerial cameras to help in security surveillance as well as other functions. Again, media and communication service providers may also put up such structure for telecommunication purposes. They are also constructed for adventure and tourism reasons. At the same time, masts could be self-supporting or could be fixed at the top of other buildings.
Tower lights are lighting devices with high intensity that remain attached to tall structures with the primary role of avoiding collisions from flying bodies. These lamps make the structures more visible to flying planes and aircrafts passing by. These devices are usually used during the night although some also use them during the daytime. The lights should have the ability to provide sufficient brightness so that even in distant miles, one can see them.
They are lamps that make the structure to be clearly visible to the passing by planes. The lamps in most cases will be used at night though other people use them during the day. These lamps are supposed to produce brightness that is sufficient so that a person can notice them even when far.
There are, however, other minor lighting options available. Such are the obstruction lights that usually have a constant illumination. The red beacons or the strobes often use incandescent filament bulbs that usually have a short lifespan. There are also medium and the high-intensity white strobes lights. The medium intensity strobes are used on 250 feet buildings and the high-intensity ones are used in 700 feet buildings.
These lamps can be used either during the day or at night. On the other hand, these lamps can use either solar or electricity as the power sources. However, it is important to liaise with a lamp dealer or installer so that you can understand the best lamp to use or the type of power the lamp will use.
There are certain benefits associated with installing and fixing these lamps. First, they provide signaling that indicates the presence of a tall structure which eliminates cases of accidents and collisions. Fixing the lamps also means complying with aviation laws which make you not to be prosecuted or charged due to noncompliance.
A tower is basically a structure that is tall and whose thickness is far much un-proportional to the height. People tend to confuse these structures with masts. However, masts have guy-wires that are used to support them. These structures are also distinguished from buildings because they are not built with habitable characteristics, they are not built for a living but for other functions. They may be made to indicate time using clocks.
On the other hand, masts may contain aerial cameras to help in security surveillance as well as other functions. Again, media and communication service providers may also put up such structure for telecommunication purposes. They are also constructed for adventure and tourism reasons. At the same time, masts could be self-supporting or could be fixed at the top of other buildings.
Tower lights are lighting devices with high intensity that remain attached to tall structures with the primary role of avoiding collisions from flying bodies. These lamps make the structures more visible to flying planes and aircrafts passing by. These devices are usually used during the night although some also use them during the daytime. The lights should have the ability to provide sufficient brightness so that even in distant miles, one can see them.
They are lamps that make the structure to be clearly visible to the passing by planes. The lamps in most cases will be used at night though other people use them during the day. These lamps are supposed to produce brightness that is sufficient so that a person can notice them even when far.
There are, however, other minor lighting options available. Such are the obstruction lights that usually have a constant illumination. The red beacons or the strobes often use incandescent filament bulbs that usually have a short lifespan. There are also medium and the high-intensity white strobes lights. The medium intensity strobes are used on 250 feet buildings and the high-intensity ones are used in 700 feet buildings.
These lamps can be used either during the day or at night. On the other hand, these lamps can use either solar or electricity as the power sources. However, it is important to liaise with a lamp dealer or installer so that you can understand the best lamp to use or the type of power the lamp will use.
There are certain benefits associated with installing and fixing these lamps. First, they provide signaling that indicates the presence of a tall structure which eliminates cases of accidents and collisions. Fixing the lamps also means complying with aviation laws which make you not to be prosecuted or charged due to noncompliance.
About the Author:
You can get valuable tips on how to select a supplier of high intensity tower lighting products and more information about a reputable supplier at http://www.bkonled.com/products?category=Tower+Kits now.
No comments:
Post a Comment